You can also pick up on Sunday!

Components

46 products


  • Tension clasp - SPP - ZB-01A - Dekra approved

    SPP Tension clasp - SPP - ZB-01A - Dekra approved

    Original tension shackles brand Steelpress SPP type ZB-01A. This lever closure is ideal for use on trailer tailboards or haulm racks. Typically used on brands such as Saris, Humbaur etc. Characteristics 40x210mm Traction force: 600 daN (600kg) Dekra approved

    €8,95

  • Foliage racks PRO - 260x150 - for VDM Trailers - Weytens - without trailer

    Foliage racks PRO - 260x150 - for VDM Trailers - Weytens - without trailer

    Pre-order now! Available soon

    Exclusive trailer - Upgrade the standard haulm racks from VDM Trailer with these professionally reinforced and tiltable haulm racks, equipped with premium tension locks. These haulm racks can be mounted on both Weytens and VDM Trailers trailers from 2012 onwards. Included 1x Front panel 150x60cm 1x Panel at the back 150x60cm 2x Corner posts 2x Panel 260x60cm Not included ❌The trailer pictured is not included 💡 RTOO tip - These foliage racks also often fit on Weymar trailers Keywords Foliage racks, foliage nets, trellis, panels Weight Total weight of this set is 61.9 KG. Remark 💡 RTOO tip : the weight of the foliage racks should be added to the net weight of the trailer. For trailers MTM 750KG, a maximum mass (gross) of 750KG is permitted, which consists of: Trailer weight - net Weight of haulm racks (61.9kg) - is considered as load Your load

    Pre-order now! Available soon

    €569,00

  • afzonderlijk lamp deksel of glas voor een aspock multipoint IV achterlicht unit

    Aspöck Aspöck Multipoint IV - loose glass - left

    New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. Characteristics Loose glass suitable for model : Multipoint IV - LEFT Manufacturer part number: UT000252 Light source: not included Functions: traffic light, tail light, turn signal, license plate light, reflector, fog light

    €12,95

  • Clamp 48mm - premium - with mounting equipment

    Winterhoff (WW) Clamp 48mm - premium - with mounting equipment

    Clamp for support wheel diameter 48mm with center distance between holes of 105mm. Technical information Manufacturer: Winterhoff Item number: ST 48 H 200VB Included Clamp Mounting material: 2x bolt, 2x lock nut, body washers

    €7,95

  • Tripod 'heavy duty' - 48mm - 70cm high - without clamp

    Novio Tripod 'heavy duty' - 48mm - 70cm high - without clamp

    Heavy duty tripod (support leg) 48mm - very robust design Technical information Manufacturer article number: RSR 48-700 Height: 70cm Tube diameter: 48mm Equipped with a welded protrusion so that the support leg cannot fall down in the raised position - see detail image Not included The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).

    €16,95

  • Identification plate - universal - Dutch - 148x38mm

    Identification plate - universal - Dutch - 148x38mm

    An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction. This blank aluminum type plate stating Flemish/Dutch properties covers the following information: Type ID number ** (=chassis number) Construction year Total weight [KG] ** (=gross/MTM) Permissible loading capacity [KG] (=tare) Permissible rear axle load [KG] 📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check. 💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.

    €9,95

  • Identification plate - universal - Dutch - 125x70mm

    Identification plate - universal - Dutch - 125x70mm

    An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction. This blank aluminum type plate stating Flemish/Dutch properties covers the following information: Type ID number ** (=chassis number) Construction year Total weight [KG] ** (=gross/MTM) Permissible loading capacity [KG] (=tare) Permissible rear axle load [KG] 📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check. 💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.

    €9,95

  • Insert cap - 50 x 20 mm - black - plastic

    Insert cap - 50 x 20 mm - black - plastic

    Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap. Available per piece, aesthetic finish, good clamping. With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.

    €0,49

  • Plug - adapter 7 to 13 pin

    Novio Plug - adapter 7 to 13 pin

    Adapter plug to switch from a vehicle power strip with 7 pins to a trailer with a 13 pin plug Characteristics Adapter short type Suitable for car: 7 pin Suitable for trailer: 13 pin Jaeger High quality ABS plastic

    €9,95

  • Foliage racks PRO - 300x150 - VDM Trailers - Weytens - without trailer

    Foliage racks PRO - 300x150 - VDM Trailers - Weytens - without trailer

    Exclusive trailer - Upgrade the standard haulm racks from VDM Trailer with these professionally reinforced and tiltable haulm racks, equipped with premium tension locks. These haulm racks can be mounted on both Weytens and VDM Trailers trailers from 2012 onwards. Included 1x Front panel 150x60cm 1x Panel at the back 150x60cm 2x Corner posts 2x Panel 300x60cm Not included ❌The trailer pictured is not included 💡 RTOO tip - These foliage racks also often fit on Weymar trailers Keywords Foliage racks, foliage nets, trellis, panels Weight Total weight of this set is 61.9 KG. Remark 💡 RTOO tip : the weight of the foliage racks should be added to the net weight of the trailer. For trailers MTM 750KG, a maximum mass (gross) of 750KG is permitted, which consists of: Trailer weight - net Weight of haulm racks (61.9kg) - is considered as load Your load

    €649,00

  • Backboard 130 cm - VDM Trailers - Weytens

    Weytens Backboard 130 cm - VDM Trailers - Weytens

    Pre-order now! Available soon

    Original Weytens back plate for truck types with a width of 130cm. ❗THIS VERSIONS IS NO LONGER AVAILABLE - REPLACED BY NEW MODEL REAR BOARD WEYTENS/VDM TRAILERS: https://aanhangwagenkopen.be/products/vdm-trailers-achterbord-130-cm-hout-2023-heden Characteristics Width: 125 cm Height: 40 cm Suitable for Weytens and VDM Trailers type box truck with tension locks Triangular reflectors red

    Pre-order now! Available soon

    €89,00

  • Aspöck Aspöck Multipoint IV - loose glass - right

    New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. Characteristics Loose glass suitable for model : Multipoint IV - RIGHT Manufacturer part number: UT000253 Light source: not included Functions: traffic light, tail light, turn signal, reflector, reversing light

    €12,95

Onderdelen

© 2024 OTOO, Powered by Shopify

  • American Express
  • Bancontact
  • Maestro
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Login

Forgot your password?

Don't have an account yet?
Create account