CLOSED FROM AUGUST 10th UNTIL SEPTEMBER 1st

Accessories - motorcycle accessories

12 products

  • Acebikes - Steady Stand Fixed

    Acebikes - Steady Stand Fixed

    The best-selling drive-in motorcycle clamp for trailers and vans. This type of Acebikes Fixed is often used by owners of multiple motorcycles with different wheel widths. The motor mount is fully adjustable and can be attached to any surface with the supplied mounting bolts. Ideal for mounting on a carriage, box truck or transporter, but also in a van or in a garage. Application The Steadystand Fixed is suitable for engines with: Wheel size from 10 inches to 19 inches Bandwidth from 90mm to 130mm Characteristics Easy to adjust without tools Edit Video with instructions for mounting an Acebikes Steadystand Example mounting on trailer In the image below, an Acebikes Steadystand Fixed is mounted on the concrete plywood loading floor of a box truck.

    €95,00

  • Acebikes - Buckle-Up - 4024 - NEW MODEL

    Acebikes - Buckle-Up - 4024 - NEW MODEL

    Original tension strap for the motorcycle handlebars. The Buckle-Up from Acebikes is an 'all-in-one' tension strap that allows you to quickly and comfortably secure the motorcycle to a trailer or trailer. Especially when the focus is on the steering wheel. The Buckle-up has an integrated handlebar harness, complete with sheep's wool protection piece and handle loops. This is all on the 360 ​​centimeter long, 35 millimeter wide polyester belt. Everything ends – in every direction – in two plastic-coated hooks with closing clips. You tighten it via the galvanized buckles - also present on two sides. After use, store everything in the included carrying bag. Technical information Lashing strap length / width: 360 cm / 3.5 cm Load capacity: 300 daN (300kg) Included 1x Acebikes Buckle-Up - model 4024 (new from 2024) 1x Acebikes carrying bag

    €49,95

  • Sale -€4,50 Acebikes - TyreFix® Pro - with tension straps for hooking

    Acebikes - TyreFix® Pro - with tension straps for hooking

    Included TyreFix® Pro​ - model 4022 Storage bag Technical information Material: polyester Maximum force: 500 daN Length of tension straps: 65 cm - tension up to a floor width of 130 cm.

    €93,45 €88,95

  • Sale -€9,05 Acebikes - U-Turn® Motor Mover

    Acebikes - U-Turn® Motor Mover

    2 in stock

    Acebikes U-turn Motor Mover, ideal for quickly moving the motorcycle on flat terrain. The engine needs to be turned or moved at home in the garage, or in your studio? An ideal job for the U-Turn Motor Mover from Acebikes. With this extremely practical maneuvering aid, motorcycles with a wheelbase between 130 cm and 152.5 cm and a maximum weight of 275 kg can be moved without much effort. Turning, sideways, forwards and backwards can all be done without effort. Technical information Model no: 503 / 6022 Colours: red, silver Material: galvanized steel with powder coating Load capacity: up to 275 KG Motorcycle wheelbase: 130 - 152 cm Total motorcycle length: max 210 cm Guarantee This item has a 2-year manufacturer's warranty 💡Tip : When the Acebikes U-Turn Motor Mover is not in use, you can easily fold it using the handle and store it quickly.

    2 in stock

    €239,00 €229,95

  • Acebikes - TyreFix® Basic - without tension straps

    Acebikes - TyreFix® Basic - without tension straps

    2 in stock

    The TyreFix® is an exceptionally solid mounting system that allows you to safely secure your motorcycle to a trailer or in a van. Thanks to the flexible material, the TyreFix fits every tire size. To prevent your motorcycle from moving, the TyreFix is ​​equipped with special friction material. The polyester belts are 65 cm long, the whole is made of strong heavy duty materials. Notice The TyreFix Basic is supplied without belts. The TyreFix® Basic must be used in combination with solid tension straps, preferably with a ratchet system. This system can be used on both the front and rear tires of the motorcycle. If you don't have tension straps yet, you can also opt for the complete TyreFix set. 🗂️ Technical information Very solid construction with heavy duty straps and hooks Maximum load: 500 kg Can also be used for motorcycles with low mudguards 💡 Top tip : Use the Tyrefix Basic in combination with the BrakeFix. 💡 Practical tip : the tires must be inflated sufficiently for the best grip.

    2 in stock

    €56,95

  • Acebikes - Steadystand Fixed - Scooter

    Acebikes - Steadystand Fixed - Scooter

    The galvanized Acebikes SteadyStand Fixed Scooter (model 153/1026) is designed to make gravity your ally. You easily mount it on the floor of a van or trailer. You can drive the scooter straight into the SteadyStand and it will stay that way. His own weight pins him down. The only thing left to do is attach a tension strap to provide additional anchorage. Edit The video below shows the instructions for mounting the Steadystand Fixed Scooter Characteristics Galvanized for extra durability Can be mounted on any hard surface (e.g. concrete plywood base plate) Including installation material The clamping system for the front wheel guarantees perfect stability Application The Steadystand Fixed Scooter is suitable for scooters with: wheels from 10 to 13 inches bandwidths from 80 to 120 mm

    €87,95

  • Battery charger - trickle charger - fast charger - 6/12V - 1.0A

    Battery charger - trickle charger - fast charger - 6/12V - 1.0A

    Your vehicle's battery suffers greatly from cold temperatures and long periods of inactivity. With a trickle charger, you prevent self-discharge of the battery, keeping it in top condition. The Höfftech Battery Charger Drip 12V 1.0A is suitable for 12 volt batteries and has a maximum charging current of 1 ampere. Perfect for your scooter, motorcycle or car! The microprocessor measures the condition of the battery and ensures that the battery is recharged in time. The trickle charger is equipped with protection against overcharging and automatically stops charging when the battery is full. When the battery starts to self-discharge, the charger will switch on again. The charger is also equipped with a winter storage mode and a fast charging function, so you can quickly start a vehicle with an empty battery. The Höfftech Battery Charger Drip Charger 12V 1.0A is equipped with protection against incorrect connection, overheating, short circuit and overcharging. Features Winter storage mode Fast charging function Protection Reverse polarity Overheating Short circuit Low voltage Too high load Technical information Brand: Hofftech Dimensions: 18 x 6 x 5 cm Voltage: 6/12V Current: 1A Packaged in original box.

    €23,45

  • Sale -€5,05 Acebikes - Steadystand Cross - Basic - model 191

    Acebikes - Steadystand Cross - Basic - model 191

    The galvanized Acebikes SteadyStand® Cross Basic has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van. By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer. Application The SteadyStand Cross is suitable for engines with: Wheels from 18 to 21 inches Band widths from 90 to 120 mm. Technical information Model: 191 / 1028 Dimensions: 54 x 25 x 75 cm Durable galvanized material Specially developed for Enduro and Dirt bikes Holds the motorcycle upright for easy lashing

    €109,00 €103,95

  • Acebikes - Steadystand Multi Fixed

    Acebikes - Steadystand Multi Fixed

    2 in stock

    The galvanized Acebikes SteadyStand Multi Fixed is designed to make clever use of gravity during transport and is fully adjustable to fit almost any type of motorcycle front or rear tire without tools. The SteadyStand Multi Fixed can easily be mounted on the base plate of a trailer or van. You simply drive your motorcycle into the SteadyStand Multi Fixed and its own weight keeps it clamped. All you need to do is attach a tension strap for extra anchorage. The SteadyStand Multi Fixed is designed so that it can be adjusted without tools. Application The Steadystand Multi Fixed is suitable for engines with: wheels from 15 to 21 inches bandwidths from 90 to 200 mm Edit The video below shows the instructions for mounting the Steadystand Multi Fixed Characteristics Adjustable without tools / easy-adjust system Completely adjustable and therefore perfect for heavier motorcycles Galvanized for extra durability Ideal for use on trailers or in vans Maximum strength when clamping the front wheel Anchorable to any hard surface Including mounting material

    2 in stock

    €139,00

  • Sale -€18,00 Acebikes - Steady stand

    Acebikes - Steady stand

    With this movable Acebikes SteadyStand® you can easily secure your motorcycle. Ideal for maintenance and repairs, but certainly also for long-term parking in your garage, garden shed, etc. Made of durable, high-quality powder-coated material with rubber feet that prevent the drive-in clamp from slipping. Easily moved thanks to the handy handle and your motorcycle takes up less space because it is upright. Suitable for securing the front and rear wheels up to a width of 90 mm to 130 mm. The wheel diameter is adjustable from 15 inches to 19 inches. Manual Acebikes Steadystand model 250-1021 manual Characteristics Durable, high-quality powder coat frame Special rubber feet to prevent the drive-in clamp from slipping Easy to move thanks to handy handle Weight: 7kg Length: 62cm Width: 52cm Height: 36cm Suitable for 15 inch to 19 inch tires Bandwidth: 90mm to 130mm

    €149,00 €131,00

  • Acebikes - Steadystand Cross - Pro - model 190

    Acebikes - Steadystand Cross - Pro - model 190

    The galvanized Acebikes SteadyStand® Cross has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van. By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer. Application The SteadyStand Cross is suitable for engines with: Wheels from 18 to 21 inches Band widths from 90 to 120 mm. Characteristics Durable galvanized material Specially developed for Enduro and Dirt bikes Keyholes in the side frame for easy removal of the SteadyStand Cross Holds the motorcycle upright for easy lashing

    €155,00

  • Acebikes - Brakefix

    Acebikes - Brakefix

    The Acebikes BrakeFix is ​​a simple and smart system for securing your front brake. It works on any motorcycle and is attached between the brake lever and handlebars. Super easy to use, with a simple but safe click system. The Acebikes BrakeFix front brake clamp can be used on any motorcycle and is very easy to use. Ideal when you park your motorcycle on the road, especially if it is on a slope, or when transporting it on a trailer or in a van. Characteristics Durable and strong material Lightweight Click-fast system Can be used on any motorcycle Adjustable in different positions Colours: red and black More info 360° view

    €9,95

Accessoires - motor accessoires

Login

Forgot your password?

Don't have an account yet?
Create account